One British Humber Pig APC in 12mm or 1:144 scale.
Available in standard PLA or high resolution resin
5 different variants are available:
Mk 1 - Fuel cans and sides storage
Mk 2 - Bull bars and extra armour
Mk 2 Holy Pig - Roof top hatch (without Perspex screens). Hatch can be glued on open or closed
Mk 2 Flying Pig - Riot screens. Screens can be glued in the stowed or deployed positions.
Mk 2 Turret pig - with turret from Shorland armoured car
Note: The top section of the side riot screens on the flying pig are printed flat and need to be bent along the groove before fitting to the vehicle. Clamp the bottom of the screen in a vice or between pliers close to the groove before bending the top section over.
Note: If the turret only option is chosen we'll supply the turret from the Turret Pig no matter which version of Pig is chosen.
Unpainted pictures shown are for 15mm PLA models
Thanks to Alan J. for the photos of the 20mm painted PLA models
All models supplied unpainted, unbased and without crew (figures)
3D printed to order
