One British Saracen APC in 15mm or 1:100 scale.
Available in standard PLA or high resolution resin
3 different variants are available:
FV603 - Standard APC
FV604 - Command
FV606 - Unarmed / Ambulance
Each version is available with a number of additional features:
Reverse flow cooling - raised air intakes on the front
Tropical radiator - cover over radiator
Side bins - a bin on both sides
Bull bars
Riot control screens - fittings and screens for two side screens and one on top
Tent - Command tent
Any combination of features is allowed except, bull bars with the tropical radiator. The command tent is a separate item so it can be ordered with any version of Saracen, however only the FV604 has the matching features on the back.
The FV606 ambulance is unarmed and therefore could be used to represent an unarmed FV603.
The Saracens used in Northern Ireland were not fitted with riot control screens, but they could have been and if they had they might have looked like this.
Note: Riot control screens can be glued in the stowed or deployed positions. The top section of the side riot screens are printed flat and need to be bent along the groove before fitting to the vehicle. Clamp the bottom of the screen in a vice or between pliers close to the groove before bending the top section over.
Note: If the Turret only option is chosen we'll supply only the turret regardless of which version and options are chosen
Unpainted pictures are for 15mm PLA models.
Thanks to Richard L. for the photos of the 20mm painted PLA models
All models supplied unpainted, unbased and without crew (figures)
3D printed to order
